Wow, so excited to be browsing 170+ links from the Favorite Destinations Party that began yesterday, with bloggers showing off their amazing getaways. I thought my “Need to Travel Here” list was long, now it’s so much longer. You’ve simply got to visit some of these links, filled with inspiring stories of places as exotic as Fiji and Greece, to fun adventures found in our Fifty States. There’s still time to link up a favorite travel destination of yours as well.
Today I have a very special guest, Kristi of Addicted to Decorating. I spied Kristi’s amazing rustic coffee table a few weeks ago on her blog, and asked her to share her step by step with all of you while I’m away. Enjoy this project, it’s fantastic!
“Hello, all of you Centsational people! I’m just thrilled to be here today while Kate is still off on vacation! Allow me to introduce myself: I’m Kristi, and by day, I’m a self employed interior decorator here in the big bustling metropolis of Waco, Texas.
But in the evenings and on the weekends, I’m a D.I.Y. fanatic and a slightly obsessed blogger. My own little virtual home is called Addicted 2 Decorating.
Hands-on D.I.Y. projects are what I love the most. In my free time, I’ve been slowly but surely putting my touch on my own little home, an 834-square-foot condo that I share with my husband, Matt, and our three furry kiddos.
Several months ago, my day job as an interior decorator and my evening/weekend passion for all things D.I.Y. began to merge when I met a very brave couple who agreed to let me use several rooms in their newly-purchased home as my D.I.Y. playground. So far, I’ve finished their master bedroom and master bathroom.
These rooms have been harder work than any other client work I’ve ever done (where I generally hire the work out to painters, tile installers, window treatment fabricators, etc.), but I’ve had an absolute ball doing the work myself, getting my hands dirty, and seeing just how little money I can spend while making huge changes to the rooms.
I’m currently finishing up the last two rooms that I’ll be tackling in their home: the kitchen and family room. And just like the other two rooms, I’m looking for any way to decorate these rooms on the cheap, which of course means DIY projects! Here’s how they started out…
For the family room, I had originally intended to make a diamond-tufted upholstered ottoman by altering my diamond-tufted upholstered headboard plans just a bit. At least, that was the original plan, right up until the day I pulled up at their house, and saw that they were having their fence replaced.
There were piles of beautiful old cedar, weathered to perfection with the most gorgeous grayed patina. It pained me to see that amazing wood headed for the landfill, so I snagged about 15 boards and put them aside.
Then I said goodbye to my plans for a diamond-tufted upholstered ottoman, and said hello to this handsome guy…
If you’ve never built anything before, a project like this is actually a great place to start. It’s supposed to look rugged and imperfect, so you can practice your cutting and gluing and nailing, and even if you don’t get them just right, you can tell people, “Oh yeah, it’s supposed to look that way!” :)
So gather your tools, and let me show you how I turned some old cedar fence boards into a cart-style coffee table.
1. Using my miter saw, I cut 1” x 8” pieces of lumber to the size that I wanted the coffee table. These pieces will form the basic frame. (This will make more sense a little later).
2. I also used my miter saw to cut eight pieces of 2” x 4” lumber, about 10.75” in length.
3. Using wood glue and clamps, I adhered pairs of 2” x 4” pieces together. These will be the legs that will support the wheels.
4. Standing the 1” x 8” pieces of lumber on edge, I made a box and fastened the pieces together with wood glue and a nail gun. (If you don’t have a nail gun, you can use wood screws.)
5. I then ran a bead of wood glue around the top edges of the 1” x 8” pieces,
6. And placed a piece of 1/4” MDF (cut to size) on top.
7. I secured the MDF in place with my nail gun.
8. Then I flipped the box over (with the MDF on bottom) and glued and nailed a leg into each corner. The basic frame was then complete.
9. With the frame right side up, I stained the top and the sides. (This was just in case any of the frame showed between the cedar boards or through knot holes. I didn’t want new, bare wood showing.)
10. Starting at one end, I cut pieces of cedar fence board the exact width of the frame, and attached them to the frame with wood glue and my nail gun.
11. I continued to attach these pieces all across the top and onto the other end. (The last piece on the top had to be trimmed using my jigsaw.)
12. And finally, I covered the sides with cedar fence boards, attaching them in such a way that they covered the cut edges of the top and side pieces.
13. With the basic construction done, I flipped the table over and attached the wheels with large wood screws and washers.
14. Then on each end, I drilled two large holes (actually the largest drill bit I could find wasn’t large enough, so each hole actually consists of three smaller holes drilled right next to each other), and then I inserted jute rope through the holes to form a handle. I secured the rope on the inside of the coffee table with wood glue and staples.
15. The last thing needed (not pictured) was to lightly sand the coffee table (just enough to remove the splinters, but not enough to remove the grayed patina), and then apply several coats of Polycrylic clear coat.
And that’s it! The result is a cart-style coffee table that adds the perfect amount of rustic warmth to any room.
I think it’s the perfect addition to the family room!
**Note: If your old fence boards are pressure treated pine instead of cedar, use with extreme caution!!! Pressure-treated lumber used to be treated with an arsenic compound. You will need to protect your eyes, and cover your nose and mouth with a quality ventilator while sawing and sanding, and handle with caution to avoid splinters. When the table is finished, you need to vacuum any remaining dust completely (and dispose of the dust immediately), and then seal the table VERY WELL with several coats of sealer. You simply cannot be too cautious with old pressure-treated wood.
Thanks so much, Kate, for inviting me here today! And thanks to all of you for graciously allowing me to share some of my decorating and DIY projects with you. I hope you’ll come visit me if you have time!
Have a wonderfully blessed day,
I agree Kristi, that will be a perfect addition to the family room space you’re designing. Thank you Kristi for being such a fabulous guest, and for showing us your DIY skills. I just LOVE your rustic coffee table and I’m sure many more will be inspired!